When your faucet starts to break down or get damaged due to wear and tear, you may wonder how to repair it. While sometimes it can be easy to do it on your own, there are instances when you’ll need plumbing repair to get the job done.
No worries because we have compiled all the most common questions about faucet repair and their answers:
1. How Can I Determine If My Faucet Is Broken and Needs Repair?
If your faucet is not running, there are a few points you can try to fix. First, make sure the faucet is turned on all the way. Try shutting off the water supply to the faucet and turning it back on to see if it fixes the problem. If that does not work, you may need to replace the faucet.
2. What Are Some Common Problems with Faucets?
A few common problems can plague faucets, such as leaks, low water pressure, and a lack of water flow. If you’re experiencing any of these issues, you likely need to have your faucet repaired.
If you’re unsure how to repair your faucet, you may want to call a plumber. Plumbers have the knowledge and experience to repair any faucet and can do it quickly and efficiently.
3. What Is the Average Cost of Faucet Repair?
The cost of plumbing repair can vary depending on the type of faucet you have, the severity of the damage, and the amount of labor involved. For example, a leaky cartridge faucet may only require a new cartridge, which is a relatively inexpensive fix. However, a corroded faucet stem may require the entire faucet to be replaced, which is a more costly plumbing repair.
4. How Can I Fix a Leaky Faucet?
Replacing a faucet washer is a fairly straightforward process that you can do in a few minutes. The initial step is to take out the faucet handle. This is usually done by unscrewing it counterclockwise. Once the handle is off, you can remove the valve stem. This is usually done by unscrewing it counterclockwise or pulling it straight out.
Once the valve stem is removed, you can replace the washer. To do this, you’ll need to hold the washer and screw the valve stem back in. Be sure to screw it in tightly so that it doesn’t leak. Once the valve stem is in place, you can put the faucet handle back on and screw it in clockwise.
5. How Can I Increase the Water Pressure in My Faucet?
If the water pressure in your faucet is low, you can try increasing it by cleaning the aerator. To do this, you’ll need to remove the aerator and soak it in vinegar for a few hours. Once it’s clean, you can put it back on, and it should improve the water pressure.
One way to tell if the aerator is dirty is to look at the water stream. If the stream is weak and has a lot of bubbles, the aerator is likely dirty and needs to be cleaned.
Faucet repair can seem daunting, but with a little know-how, it can be a breeze. The most crucial thing to remember is to be patient and take time. If you follow the instructions in this article, you should be able to fix your faucet quickly.
Wooten Knockout Plumbing offers affordable and high-quality plumbing and faucet repair to residents of Tulsa. Get in touch with us today for your faucet issues.